Beltrán Telles, Aurelio; López Monteagudo, Francisco Eneldo; Reta Hernández, Manuel
Resumen:
Se presenta el prototipo de bajo costo de un convertidor Buck de pequeña capacidad, para la enseñanza del modelado y control del convertidor, utilizando la tarjeta de procesamiento digital de señales TMS320LF2407 y al software VisSim ECD para la implementación del control, y al IGBT IRG4PC50U y al controlador IR2110, para su construcción. En el análisis se determinaron las ganancias del controlador PID para alcanzar las respuestas sobreamortiguadas en un cierto período de tiempo. Las pruebas efectuadas indicaron una operación adecuada para diferentes requirementos de voltaje de salida. Asimismo, se probó la robustez del controlador PID variando la carga, encontrándose un voltaje de salida con alto valor de rizado.
Descripción:
The low-cost prototype of a small capacity Buck converter is presented, for the teaching of converter modeling and control, using the TMS320LF2407 digital signal processing card and VisSim ECD software for control implementation, and the IGBT IRG4PC50U and to the IR2110 controller, for construction. The analysis determined the gains of the PID controller to achieve the overdamped responses in a certain period of time. Tests carried out indicated adequate operation for different output voltage requirements. Also, the robustness of the PID controller was tested by varying the load, finding an output voltage with a high ripple value.